ABOUT LABORATORY
The department consists of various laboratories and facilities with modern sophisticated equipments that fulfill the requirement of syllabi as per the guidelines laid down by AICTE & SGB Amravati University, Amravati as well as to carry out research in all areas related to Mechanical Engineering.CAD & COMPUTER LAB
Facilities
In these labs the practical’s in the subjects CSA-I, CSA-II, ORT, FEA, CAD are performed by students. Students also use the internet facilities for their projects & seminars. Various CAD and FEA packages are also used for the certificate courses in CAD/CAM/FEA
In these labs the practical’s in the subjects CSA-I, CSA-II, ORT, FEA, CAD are performed by students. Students also use the internet facilities for their projects & seminars. Various CAD and FEA packages are also used for the certificate courses in CAD/CAM/FEA
METROLOGY & METALLURGY LAB
Facilities
In these labs the practical’s in the subjects Engineering Metallurgy, Production Technology. This lab is also used for tool design of is well equipped with instruments like LTD, DTD etc. Apart from this actual press tools & cutting tools are displayed for ease of understanding of the design of various cutting & forming tools.
In these labs the practical’s in the subjects Engineering Metallurgy, Production Technology. This lab is also used for tool design of is well equipped with instruments like LTD, DTD etc. Apart from this actual press tools & cutting tools are displayed for ease of understanding of the design of various cutting & forming tools.
Equipments
1. ISOMET Tool Maker- Microscope small.
2. Floating Carriage Machine.
3. Electric Comparator.
4. Profile Projector.
5. Inverted type metallurgical microscope (trinocular).
6. Single Disc Polishing Machine.
7. Double Disc Polishing Machine.
8. Specimen Moulding Die Set.
9. Muffle Furnace.
10.Trinocular Metallurgical Microscope with Display Screen
1. ISOMET Tool Maker- Microscope small.
2. Floating Carriage Machine.
3. Electric Comparator.
4. Profile Projector.
5. Inverted type metallurgical microscope (trinocular).
6. Single Disc Polishing Machine.
7. Double Disc Polishing Machine.
8. Specimen Moulding Die Set.
9. Muffle Furnace.
10.Trinocular Metallurgical Microscope with Display Screen
FLUID POWER LAB
Facilities
Fluid mechanics and machines lab is used to conduct undergraduate practical’s for two subjects FP-I and FP-II at 3rd Semester & 6th Semester level. The lab is fully equipped with the required experimental setups, models and charts.
Fluid mechanics and machines lab is used to conduct undergraduate practical’s for two subjects FP-I and FP-II at 3rd Semester & 6th Semester level. The lab is fully equipped with the required experimental setups, models and charts.
Equipments
1. Uniflow Oil power Hydraulic trainer kit.
2. Kaplan Turbine Test Rig. ALMECH, with rope brake Dynameters and glass tubes.
3. Pelton Wheel Turbine Test Rig.
4. Francis Turbine Test Rig.
5. Centrifugal Pump Test Rig.
6. Gear Pump Test Rig.
7. Multistage Centrifugal Pump Test Rig.
8. Reciprocating Pump Test Rig.
9. Setup of Measuring metacentric height.
10. Setup of performance of Bernoulli’s Theorem.
11. Setup of Venturimeter.
12. Setup of Measuring Reynolds.
13. Setup of pipe flow measurement.
14. Setup of Hydraulic Ram.
1. Uniflow Oil power Hydraulic trainer kit.
2. Kaplan Turbine Test Rig. ALMECH, with rope brake Dynameters and glass tubes.
3. Pelton Wheel Turbine Test Rig.
4. Francis Turbine Test Rig.
5. Centrifugal Pump Test Rig.
6. Gear Pump Test Rig.
7. Multistage Centrifugal Pump Test Rig.
8. Reciprocating Pump Test Rig.
9. Setup of Measuring metacentric height.
10. Setup of performance of Bernoulli’s Theorem.
11. Setup of Venturimeter.
12. Setup of Measuring Reynolds.
13. Setup of pipe flow measurement.
14. Setup of Hydraulic Ram.
REFRIGERATION & AIR CONDITIONING LAB
Facilities
RAC lab is utilized to conduct undergraduate practical's for the subject Refrigeration and Air Conditioning (VIII Sem). The lab is well equipped with the experimental setups, models and charts as required in the curriculum. Maintenance is also carried out in the lab.
RAC lab is utilized to conduct undergraduate practical's for the subject Refrigeration and Air Conditioning (VIII Sem). The lab is well equipped with the experimental setups, models and charts as required in the curriculum. Maintenance is also carried out in the lab.
Equipments
1. Experimental Test Rig of Mini Ice plant (Capacity 50 kg. per day).
2. Test Rig of Vapour Compression System.
3. Thermo hygrograph.
4. Gas Charging Unit with Vacuum Pump set.
5. Anemometer.
6. Digital Barometer.
7. Test Rig of Air Conditioning System.
8. Electrolux Refrigerator.
1. Experimental Test Rig of Mini Ice plant (Capacity 50 kg. per day).
2. Test Rig of Vapour Compression System.
3. Thermo hygrograph.
4. Gas Charging Unit with Vacuum Pump set.
5. Anemometer.
6. Digital Barometer.
7. Test Rig of Air Conditioning System.
8. Electrolux Refrigerator.
ENERGY CONVERSION LAB
Facilities
This Lab caters to the needs of following subjects: 1. Energy Conversion-I, 2.Energy Conversion-II. In all 27 different experiments, as prescribed by university belonging to above subjects can be performed in this Lab. Out of this 11 are actual performance trials and 26 are study experiments performed with the help of working models.
Equipments
1. Computerized Engine Indicator with Engine test setup.
2. Ruston Model 4ydak Diesel Generating Set developing 40 KVA at NTP condition with control panel.
3. Cut section model of the car.
4. MEXA-324GB,Horiba Automotive CO/HC Exhaust Gas Analyzer with standard Accessories to operate on 230 v. 50 Hz.
5. Multi Cylinder Petrol Engine Test Rig with Hydraulic Dynameters.
This Lab caters to the needs of following subjects: 1. Energy Conversion-I, 2.Energy Conversion-II. In all 27 different experiments, as prescribed by university belonging to above subjects can be performed in this Lab. Out of this 11 are actual performance trials and 26 are study experiments performed with the help of working models.
Equipments
1. Computerized Engine Indicator with Engine test setup.
2. Ruston Model 4ydak Diesel Generating Set developing 40 KVA at NTP condition with control panel.
3. Cut section model of the car.
4. MEXA-324GB,Horiba Automotive CO/HC Exhaust Gas Analyzer with standard Accessories to operate on 230 v. 50 Hz.
5. Multi Cylinder Petrol Engine Test Rig with Hydraulic Dynameters.
HEAT TRANSFER LAB
Facilities
This lab is equipped with test rigs used for carrying out experiments in the subject Heat Transfer as prescribed by the University.
This lab is equipped with test rigs used for carrying out experiments in the subject Heat Transfer as prescribed by the University.
Equipments
1. Heat Transfer through Composite Wall,
2. Emissivity measurement apparatus.
3. Heat transfer in natural convection.
4. Thermal conductivity of insulating powder.
5. Srefan-VBoltzman apparatus.
6. Heat Transfer in forced convection.
7. Critical heat flux apparatus.
8. Thermal conductivity of liquid.
9. Standard Fortin’s barometer.
10. Parallel flow/counter flow heat exchanger.
11. Heat Transfer from pin fin.
12. Thermal conductivity of metal rod.
1. Heat Transfer through Composite Wall,
2. Emissivity measurement apparatus.
3. Heat transfer in natural convection.
4. Thermal conductivity of insulating powder.
5. Srefan-VBoltzman apparatus.
6. Heat Transfer in forced convection.
7. Critical heat flux apparatus.
8. Thermal conductivity of liquid.
9. Standard Fortin’s barometer.
10. Parallel flow/counter flow heat exchanger.
11. Heat Transfer from pin fin.
12. Thermal conductivity of metal rod.
THEORY OF MACHINES & MACHINE DESIGN LAB
Facilities
n ‘Theory of Machine and Machine Design Lab’ practical’s of the subject Theory of Machine-I , Theory of Machine-II, Machine Design-I & Machine Design-II are performed by the students for 5th & 6th Sem and 7th Sem B.E. courses respectively . the lab is well equipped with all the required syllabus based major experiments setups, models, various mechanisms and chart.
n ‘Theory of Machine and Machine Design Lab’ practical’s of the subject Theory of Machine-I , Theory of Machine-II, Machine Design-I & Machine Design-II are performed by the students for 5th & 6th Sem and 7th Sem B.E. courses respectively . the lab is well equipped with all the required syllabus based major experiments setups, models, various mechanisms and chart.
Equipments
1. Cam Analysis Machine.
2. Generation Involutes Profile by Rack Cutter.
3. Interference / Undercutting of Gears Demo Model.
4. Vibration Lab set up.
5. Motorized Gyroscope.
6. Whirling Shaft Apparatus.
7. Static and Dynamic Balancing set up.
8. Design of Screw Jack.
9. Hartnell Governor Model.
10. Lathe Tool Dynamometer.
11.Drill Tool Dynamometer.
12. Erichson Cupping Tester.
13. Milling Fixture (Telco Ltd.).
1. Cam Analysis Machine.
2. Generation Involutes Profile by Rack Cutter.
3. Interference / Undercutting of Gears Demo Model.
4. Vibration Lab set up.
5. Motorized Gyroscope.
6. Whirling Shaft Apparatus.
7. Static and Dynamic Balancing set up.
8. Design of Screw Jack.
9. Hartnell Governor Model.
10. Lathe Tool Dynamometer.
11.Drill Tool Dynamometer.
12. Erichson Cupping Tester.
13. Milling Fixture (Telco Ltd.).
MEASUREMENT SYSTEMS & MECHATRONICS LAB
Facilities
The Measurement Systems & Mechatronics Lab is equipped to conduct 15 various practical’s Maximum 08 practical’s are conducted in Vth semester based on list given in SGB Amravati University syllabus.
The Measurement Systems & Mechatronics Lab is equipped to conduct 15 various practical’s Maximum 08 practical’s are conducted in Vth semester based on list given in SGB Amravati University syllabus.
Equipments
1. Instrumentation Tutor Part A for Linear & Angular. Displacement measurement by using LVDT, capacitive pick up and potentiometric devices.
2. Instrumentation Tutor part-B for Temperature Measurement.
3. Instrumentation Tutor part-C for Speed Measurement by using photoelectric pick up magnetic pick up transducers.
4. Instrumentation Tutor part-D for Force Measurement using strain gauges.
5. Dead Weight Pressure Gauge Tester.
6. Digital Stroboscope Tachometer.
7. Optical Radiation Pyrometer.
8. PC based analog & digital motor control training system.
9. Flow measurement using optical transducer.
10. Pneumatic Servo System.
11. Liquid level Measurement System.
1. Instrumentation Tutor Part A for Linear & Angular. Displacement measurement by using LVDT, capacitive pick up and potentiometric devices.
2. Instrumentation Tutor part-B for Temperature Measurement.
3. Instrumentation Tutor part-C for Speed Measurement by using photoelectric pick up magnetic pick up transducers.
4. Instrumentation Tutor part-D for Force Measurement using strain gauges.
5. Dead Weight Pressure Gauge Tester.
6. Digital Stroboscope Tachometer.
7. Optical Radiation Pyrometer.
8. PC based analog & digital motor control training system.
9. Flow measurement using optical transducer.
10. Pneumatic Servo System.
11. Liquid level Measurement System.
AUTOMOBILE ENGINEERING & I. C. ENGINES LAB
Facilities
This Lab caters to the needs of following subjects: 1. I.C.Engine, 2. Automobile Engineering. In all 27 different experiments, as prescribed by university belonging to above subjects can be performed in this Lab. Out of this 11 are actual performance trials and 16 are study experiments performed with the help of working models.
This Lab caters to the needs of following subjects: 1. I.C.Engine, 2. Automobile Engineering. In all 27 different experiments, as prescribed by university belonging to above subjects can be performed in this Lab. Out of this 11 are actual performance trials and 16 are study experiments performed with the help of working models.
Equipments
1. Computerrized Engine Indicator with Engine test setup.
2. Ruston Model 4ydak Diesel Generating Set developing 40 KVA at NTP condition with control panel.
3.Cut section model of the car. 4.MEXA-324GB,Horiba Automotive CO/HC Exhaust Gas Analyzer with standard Accessories to operate on 230 v. 50 Hz.
5 Multi Cylinder Petrol Engine Test Rig with Hydraulic Dynameters.
6. Automobile systems/components.
7. Diesel Engine with Mech. Test Rig 5 HP, 4stroke, 1500 rpm, 300 mm, Rope brake arrangement.
8. Air Compressor Test Rig, 2 stage; suitable for 7kg, 7.5 HP motor.
9. Bosch-filter paper darkening type smoke meter for measurement of smoke density.
10. Centrifugal blower test rig.
11. Spark plug cleaning and testing device.
1. Computerrized Engine Indicator with Engine test setup.
2. Ruston Model 4ydak Diesel Generating Set developing 40 KVA at NTP condition with control panel.
3.Cut section model of the car. 4.MEXA-324GB,Horiba Automotive CO/HC Exhaust Gas Analyzer with standard Accessories to operate on 230 v. 50 Hz.
5 Multi Cylinder Petrol Engine Test Rig with Hydraulic Dynameters.
6. Automobile systems/components.
7. Diesel Engine with Mech. Test Rig 5 HP, 4stroke, 1500 rpm, 300 mm, Rope brake arrangement.
8. Air Compressor Test Rig, 2 stage; suitable for 7kg, 7.5 HP motor.
9. Bosch-filter paper darkening type smoke meter for measurement of smoke density.
10. Centrifugal blower test rig.
11. Spark plug cleaning and testing device.
NON CONVENTIONAL ENERGY SOURCES LAB
Facilities
This lab is well equipped with the necessary equipments as per syllabus of SGB, Amravati University. This lab is conduct the experiments in NES subject for undergraduate students.
This lab is well equipped with the necessary equipments as per syllabus of SGB, Amravati University. This lab is conduct the experiments in NES subject for undergraduate students.
Equipments
1. Solar Water Heater System
2. Flat collector
3. Sunshine Record
4. Pyranometer & Potentiometer for recording
5. Biomass Gasifier
6. Solar Photovoltaic Demo Model
1. Solar Water Heater System
2. Flat collector
3. Sunshine Record
4. Pyranometer & Potentiometer for recording
5. Biomass Gasifier
6. Solar Photovoltaic Demo Model
Robotics and Automation Lab
Facilities
Robotics and automation lab is used to conduct undergraduate practicals for three subjects Robotics and Industrial Applications, CIM and Mechatronics at 7th Semester & 8th Semester level. The lab is fully equipped with the required experimental setups and machines.
Robotics and automation lab is used to conduct undergraduate practicals for three subjects Robotics and Industrial Applications, CIM and Mechatronics at 7th Semester & 8th Semester level. The lab is fully equipped with the required experimental setups and machines.
Machines
1. Yaskawa AR1440 Robot
2. Flexmill VMC
3. Stratasys 3D printing machine
4. Hydraulic and pneumatic trainer
5. PLC for programming