DIGITAL SIGNAL PROCESSING VLSI LAB
Facilities
Computers:
- Dell R4 I3-3220 CPU, 3.30 GHz
- 3.41 GB RAM
- 200 GB HDD
- 16’ LCD monitor
- DSP 6713 DSP Lab Version 2.0, TMS320C6713 DSP Starter kit Model No. TMDSD SK 6713
- VLSI Hardware FPGA / CPLD kits along with software supports: Universal Multi Vendor Trainer Board
Software:
- MATLAB
- P-Spice Release 12
- C/C++ compiler
- Micro wind 3.5
- FPGA Advantage (Mentor Graphics) for HDL
- VLSI Software (Server Based)
SIMULATION / DIGITAL COMMUNICATION LAB
Facilities
Computers:
- DELL 3010 DT Intel Core i3 Processor 3rd Gen 3.3 GHz
- 4 GB RAM
- 250 GB graphics Inbuilt
- 18.5" LED TFT monitor
Software:
- Microsoft Windows XP
- MatLab
- pSpice
- Xilinx ISE Foundation
- MICROWIND package includes:
- DSCH3: schematic editor & simulator
- PIC16f Modeler
- Verilog Compiler
- SPICE extractor
- MICROWIND 3 nano Lambda
- Virtuoso FAB
- MEM sim
- PRO thumb
- PRO tutor
COMPUTER PROGRAMMING HARDWARE DEIGN LAB
Facilities
Computers:
- All in One Intel Atom CPU D525 1.8 GHz
- 1 GB RAM
- 300 GB HDD
- Combo drive
- 21’’ LCD monitor
- Lenovo Desktop Atom 1G 320G DOS
- 18.5" TFT DVD R/W
MICROCOMPUTING LAB
Facilities
- PCL ADD ON CARD [DSP]
- 48 channel logic analyzer card - 2 Nos.
- EPROM Programmer - 1 No.
- NI Cir- Emulator for 8086 mp with 64 K - 1 No.
- 48 channel logic analyzer card - 5 Nos.
- Hercules Board FPGA with ARM (Rs. 13100/- each) - 1 No.
- 30 MHz dual trace CRO 3706C* - 1 No.
- 25MHz Dual trace Oscilloscope - 1 No.
- Hellion Board PIC (8BIT) PIC 18F 452 - 1 No.
- PC add on card pcl 812 AD/DA - 1 No.
- Dyna-51: 8031/51 Based microcontroller trainer with LCD display & Power Supply cable & converter set with keyboard for Dyna-51 - 1 No.
- MF - DYNA - 86, 8 MHz, 64 kB EPROM, 16 KB RAM Battery Backup for Static RAM, 8254 Timer – Counter Chip (3 Chan) 58 TTL I/O Lines Using two 8255, Printer Interface, RS -232 C Serial Port Using 8251, Onboard 8259 PIC, + SMPS-01 + CABLE & CONNECTOR SET - 1 No.
- Programmable power supply - 1 No.
- Titan-II ARM7 Development Kit - 1 No.
ELECTRONICS DEVICES & CIRCUITS LAB
Facilities
- 40MHz 2 channel 4 trace analog oscilloscope
- 30 MHz dual trace CRO 3706C*
- DX-1102, 60MHz, 1GS a / s, 7" Colour display Digital storage oscilloscope - 2 Nos.
- 25MHz Dual trace Oscilloscope
- 15MHz Dual trace Oscilloscope
- Function/ Pulse (0-230MHz) Generator
- 10MHz function generator, 2219U
- 3 MHz multi waveform signal (function) generator with modulation. (Model No. MSGM3M)
- 2MHz AM/FM function generator FGM2M
- 3.5 Digit True RMS Digital Multi meters - 2 Nos.
- Component development systems
- Kit for study of Filters HI, Lo & band pass active
- Digital Power Supply (5V-2V)
- D.C. Power Supply Duel (0-30 V) 1A
- Kit for study characteristic of Wein bridge oscillator
- Kit for study characteristic of Zener Diode
- Kit for study characteristic of P-N junction
- Kit for study of Filters HI, Lo & band pass passive
- Kit for study characteristic of CE configuration
- Kit for study characteristic of UJT
- Kit for study characteristic of JFET
ELECTRONIC WORKSHOP & INSTRUMENTATION LAB
Facilities
- 150MHz storage oscilloscope, 36150DC
- 30 MHz dual trace CRO 3706C*
- 50MHz Dual trace Oscilloscope - 2 Nos.
- 40MHz 2 channel 4 trace analog oscilloscope
- 20MHz Dual trace Oscilloscope
- DX-1102, 60MHz, 1GS a / s, 7" Colour display Digital storage oscilloscope - 3 Nos.
- 25MHz Dual trace Oscilloscope
- 10MHz function generator, 2219U
- Function/ Pulse (0-230MHz) Generator
- Instrumentation tutor Part-I
- Module for Omni graphic - 2 Nos.
- 3 O Dimmer stat 15amp
- UV dip coating machine with Initial setup chemicals
- SCR Phase Control Power Supply (0-300V 3A)
- DC servomotor speed Torque char set up
- Temperature Measurement Kit Using RTD
- 3.5 Digit True RMS Digital Multi meters - 13 Nos.
- PROTOBOARD
- 0-64V / 0-1 A regulated DC power supply with digital Display - 2 Nos.
- IM-018. Blood Pressure Measurement system.
- Function Sweep Generator
- PID controller
- Component development systems
- IM-006. Displacement Measurement using LVDT - 2 Nos.
- Instrumentation tutor Part-II
- IM-005. Temp. Measurement & control using Thermister.
- Transistor curve tracer
- 1 O Dimmer stat 15amp
MACHINE LAB / NETWORK LAB
Facilities
- Ultrasonic Gauge Meter
- Synchronous M/c, 3Ph. 1500 rpm, 440 V, 7.5 A - 2 Nos.
- Induction motor (slip-ring) 3 Ø, 50Hz 3.73HP, 500 rpm
- Induction Motor 1440 rpm, 7.5 A Squirrel cage
- 3 Phase Rectifier/P-44, o/p-250V, 30V
- Counter Timer (80 MHz)
- 3 phase Dimmer stat 15.A
- 3 Phase Rectifier (0-120V) 5A
- DC Motor 2.5kw, 1500rpm, 12 A
- DC Motor (Shunt) 3.73KW, 19.1A, 1500 rpm
- DC motor (shunt) 3.75kw 19 A 1500 rpm 250 v
- DC M/C Compound 3 KW 230V, 12A, 1500 rpm
- 5MHz Signal trace Oscilloscope
- Kelvin bridge
- D.C. Power Supply Duel (0-30 V) 1A
- Function Generator - 2 Nos.
- Network theorem trainer (Norton theorem)
- Network theorem trainer (Thevenin theorem)
- Network theorem trainer (Max power transfer theorem)
- Network theorem trainer (Kirchhoff’s law theorem)
- Network theorem trainer (Superposition theorem)
- Network theorem trainer (Reciprocity theorem)
- 1 Ph Dimmer stat (1.08 KVA) 270 V, 4A
- Regulated Dual power, supply 0-30v 3ADC
- Speed torque characteristics of AC servo motor
- Kit for loss of charge method
- Kelvin’s bridge trainer
- MaSchering bridge trainer
- Maxwell bridge trainer
- Owns bridge trainer
- Hays bridge trainer
- Andersons bridge
- Wheatstone bridge trainer
- Moving Coil AC 90 Educational Desk STA
- Digital Energy Meter
POWER ELECTRONICS / IC LAB
Facilities
- Ultrasonic Gauge Meter
- Synchronous M/c, 3Ph. 1500 rpm, 440 V, 7.5 A - 2 Nos.
- Induction motor (slip-ring) 3 Ø, 50Hz 3.73HP, 500 rpm
- Induction Motor 1440 rpm, 7.5 A Squirrel cage
- 3 Phase Rectifier/P-44, o/p-250V, 30V
- Counter Timer (80 MHz)
- 3 phase Dimmer stat 15.A
- 3 Phase Rectifier (0-120V) 5A
- DC Motor 2.5kw, 1500rpm, 12 A
- DC Motor (Shunt) 3.73KW, 19.1A, 1500 rpm
- DC motor (shunt) 3.75kw 19 A 1500 rpm 250 v
- DC M/C Compound 3 KW 230V, 12A, 1500 rpm
- 5MHz Signal trace Oscilloscope
- Kelvin bridge
- D.C. Power Supply Duel (0-30 V) 1A
- Function Generator - 2 Nos.
- Network theorem trainer (Norton theorem)
- Network theorem trainer (Thevenin theorem)
- Network theorem trainer (Max power transfer theorem)
- Network theorem trainer (Kirchhoff’s law theorem)
- Network theorem trainer (Superposition theorem)
- Network theorem trainer (Reciprocity theorem)
- 1 Ph Dimmer stat (1.08 KVA) 270 V, 4A
- Regulated Dual power, supply 0-30v 3ADC
- Speed torque characteristics of AC servo motor
- Kit for loss of charge method
- Kelvin’s bridge trainer
- MaSchering bridge trainer
- Maxwell bridge trainer
- Owns bridge trainer
- Hays bridge trainer
- Andersons bridge
- Wheatstone bridge trainer
- Moving Coil AC 90 Educational Desk STA
- Digital Energy Meter
COMMUNICATION ENGINEERING / MICROWAVE LAB
Facilities
- 1.1 GHz Spectrum Analyzer SA3011
- 100MHz 4 trace Oscilloscope
- Microwave bench
- Caddo 825 (Advance) Tec lab. 25 MHz two channel 4 trace microcontroller based oscilloscope. With 10 MHz fun. Gen. Sine, Square, Triangle, pulse, ramp DSB std., DSB balance, FM Output, Fixed power supply, + / - 12 V / 250 mA, 5V / 1 A, 4.5 Digit Multi meter, 20MHz freq. counter or digital volt meter or curve tracer or logic scope
- 60MHz 2 channel 4 trace analog oscilloscope (Model No. 3806)
- 50MHz Dual trace Oscilloscope
- ST2502 Advance Fiber Optic Trainer
- 40MHz 2 channel 4 trace analog oscilloscope (Model No. 3804-06)
- 16Qam Transmitter & Receiver Training system VLSI Board
- DX-1102, 60MHz, 1GS a / s, 7" Colour display Digital storage oscilloscope
- MSK modulator Demodulator (Sr. No 0113118)
- FM.AM Signal Generator
- 30 MHz dual trace CRO 3706C*
Seminar Hall
Facilities
Well furnished seminar hall having capacity of 150 students